Mine Design of Laterite Nickel Ore Based on Pit Limit Optimization with Floating Cone Method at Meranti Pit of PT Ang and Fang Brother

Authors

  • Rifyan Sabaruddin Universitas Hasanuddin
  • Aryanti Virtanti Anas Departemen Teknik Pertambangan, Fakultas Teknik, Universitas Hasanuddin
  • Rizki Amalia Departemen Teknik Pertambangan, Universitas Hasanuddin
  • Rini Novrianti Sutardjo Tui Departemen Teknik Pertambangan, Universitas Hasanuddin

DOI:

https://doi.org/10.20956/geocelebes.v7i1.23065

Keywords:

Laterite nickel, pit optimization, pit design

Abstract

PT Ang and Fang Brother Site Lalampu is a nickel laterite mines company located at Lalampu Village, Morowali Regency, Central Sulawesi Province. The purpose of research is to determine the ultimate pit limit using floating cone method and calculate the net present value (NPV), to design the ultimate pit limit at Front 8 of Meranti Pit (one of the company’s fronts), to calculate the mined laterite nickel reserves and the overburden based on the pit design. The data used are block model data, topography, capital and operating costs, commodity price, density, geotechnical data, mine recovery 85%, cut-off grade 1.3%, and the company's production target of 50,000 tons/month. Data processing generates Pit Shell 9 as the ultimate pit limit with ore recovery of 264,375 tons from 284,063 tons of Front 8 resources. Based on the design using Micromine 2021 software with an area of 5.25 hectares, a total of 234,142 tons laterite nickel ore obtained by stripping 389,063 BCM of the overburden, and it still economical with stripping ratio value (1.66 BCM/ton), smaller than the BESR value (6.32 BCM/ton). The amount of nickel laterite reserves produced based on mine recovery of 85% is 199,021 tons so the life of mine lasted 3.98 months.

Downloads

Download data is not yet available.

References

Agrawal. (2012). Modeling of Open Cast Mines Using Surpac and Its Optimization. Thesis, Department of Mining, National Institute of Technology, India. https://core.ac.uk/download/pdf/53188255.pdf

Araya, A. S., Nehring, M., Vega, E. T., & Miranda, N.S. (2020). The Impact of Equipment Productivity and Pushback Width on the Mine Planning Process. Journal of the Southern African Institute of Mining and Metallurgy, 120(10), 599–608. http://www.scielo.org.za/pdf/jsaimm/v120n10/08.pdf

Ares, G., Fernandez, C. C., Alvarez, I. D., Arias, D., & Diaz, A. B. (2022). Open Pit Optimization Using the Floating Cone Method: A New Algorithm. Minerals, 12(495), 1–20. https://doi.org/10.3390/min12040495

Aswandi, D., & Yulhendra, D. (2019). Ultimate Pit Design Redesign Using Minescape 4.118 Software in Pit S41 PT. Energi Batu Hitam, Muara Lawa and Siluq Ngurai Districts, West Kutai Regency, East Kalimantan. Jurnal Bina Tambang, 4(1), 153–164. http://ejournal.unp.ac.id/index.php/mining/article/view/103474.

Azadi, N., Mirzaei-Nasirabad, H., & Mousavi, A. (2023). Evaluating the efficiency of the genetic algorithm in designing the ultimate pit limit of open-pit mines. International Journal of Mining and Geo-Engineering, 57(1), 55–58. https://doi.org/10.22059/ijmge.2022.340973.594963

Butt, C. R. M., & Cluzel, D. (2014). Nickel Laterite Ore Deposits: Weathered Serpentinites Provided for Non-Commercial Research and Education Use. International Journal of Mineralogy, Geochemistry, and Petrology, 9(2), 123–128. https://doi.org/10.2113/gselements.9.2.123

Esmaeil, R., Ehsan, M., Reza, S., & Mehran, G. (2018). Optimized Algorithm in Mine Production Planning, Mined Material Destination, and Ultimate Pit Limit. Journal of Central South University, 25, 1475–1488. https://doi.org/10.1007/s11771-018-3841-5

Gusman, M., & Octova, A. (2018). Estimasi Cadangan Insitu Melalui Kegiatan Inpit Drill Activities Pada Bukit Everest, Cherokee, dan Strada di PT Antam (Persero) Tbk UBPN Sultra. Jurnal Bina Tambang, 3(2), 722–735. http://ejournal.unp.ac.id/index.php/mining/article/view/10100

Hustrulid, W., Kuchta, M., & Martin, R. (2013). Open Pit Mine Planning and Design, 3rd Edition. AA Balkema Publisher, Rotterdam Brookfield. Netherland.

Jodeiri, B., Dehghani, H., & Sadeghi, M. (2021). Ultimate Pit Limit Determination Using Flashlight Algorithm. International Journal of Mining and Geo-Engineering, 55(1), 43–48. https://doi.org/10.22059/ijmge.2020.296120.594840

König, U. (2021). Nickel Laterites—Mineralogical Monitoring for Grade Definition and Process Optimization. Minerals, 11(11), 1178. https://doi.org/10.3390/min11111178

Maritz, J. H., & Uludag, S. (2019). Developing a mining plan for restarting the operation at Uis mine. Journal of the Southern African Institute of Mining and Metallurgy, 119(7), 621–630. http://www.scielo.org.za/pdf/jsaimm/v119n7/06.pdf

Meagher, C., Dimitrakopoulos, R. & Avis, D. (2014). Optimized open pit mine design, pushbacks, and the gap problem—a review. Journal of Mining Science, 50(3), 508–526. https://doi.org/10.1134/S1062739114030132

Nwosu, J. I., Ononuju, N. F., & Bassey, M. I. (2022). A Review of Pit Limit of Itakpe Iron Ore Deposit, North Central Nigeria. International Journal of Scientific Research and Engineering Development, 5(2), 565–573. http://www.ijsred.com/volume5/issue2/IJSRED-V5I2P65.pdf

PT Ang and Fang Brother. (2019). Boundary Plan Report of PT Ang and Fang Brother. Morowali Regency, Central Sulawesi Province.

Qing-hua, G., Chun-ni, B., Fa-ben, L., & Abrand, J. (2014). The Optimization and Application of Cut-off Grades of Multiple Metal Open-pit Mines Based on Equivalent Grade. Metallurgical and Mining Industry, 6, 83–91. https://www.metaljournal.com.ua/assets/MMI_2014_6/16-GU-Qing-hua.pdf

Rahmi, F., & Yulhendra, D. (2019). Optimasi Pit Limit Penambangan Mineral Nikel Laterit PT ANTAM Tbk. Unit Bisnis Penambangan Nikel di Site Pomalaa, Sulawesi Tenggara di Front X. Jurnal Bina Tambang, 4(3), 295–305. http://ejournal.unp.ac.id/index.php/mining/article/view/105789

Shehu, A., & Lipo, S. (2016). 3D Modeling and Interpretation of Fe/Ni Deposit in Skroska Mine Using Micromine. Journal of Natural and Technical Sciences, XX1(1), 49–62. https://www.researchgate.net/publication/328580009

Tivig, D. F., Rotunjanu, I., Florea A., Manu, C. S. (2015). Mining Design Based on A Digital Terrain and Deposit Body Model at Tismana Open Pit. Annals of the University of Petroşani Mining Engineering, 16, 5–13.

Whittle, J., & Rozman, L.I. (1991). Open Pit Design in the 90s. Proceedings Mining Industry Optimisation Conference, The Australian Institute of Mining and Metallurgy, Melbourne.

Xiao, J., Ding, W., Peng, Y., Chen, T., Zou, K., & Wang, Z. (2020). Extraction of Nickel from Garnierite Laterite Ore Using Roasting and Magnetic Separation with Calcium Chloride and Iron Concentrate. Minerals, 10(4), 352. https://doi.org/10.3390/min10040352

Zeyni, E. E., Kakaie, R., & Yousefi, A. (2012). A New Algorithm for Optimum Open Pit Design: Floating Cone Method III. Journal of Mining & Environment, 2(2), 118–125. https://www.magiran.com/paper/999017/?lang=en

Downloads

Published

2023-04-30

How to Cite

Sabaruddin, R., Anas, A. V., Amalia, R., & Tui, R. N. S. (2023). Mine Design of Laterite Nickel Ore Based on Pit Limit Optimization with Floating Cone Method at Meranti Pit of PT Ang and Fang Brother. JURNAL GEOCELEBES, 7(1), 64–76. https://doi.org/10.20956/geocelebes.v7i1.23065

Issue

Vol. 7 No. 1: April 2023

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).