ANALISIS KESTABILAN LERENG HIGHWALL MENGGUNAKAN METODE BISHOP SIMPLIFIED PADA PIT 13 PT BELAYAN INTERNASIONAL COAL KECAMATAN MARANGKAYU KABUPATEN KUTAI KARTANEGARA

Authors

  • Muhammad Amin Syam Teknik Geologi, Universitas Mulawarman, Jl. Sambaliung No.9 Samarinda 75119, Indonesia
  • Heriyanto Heriyanto Teknik Geologi, Universitas Mulawarman, Jl. Sambaliung No.9 Samarinda 75119, Indonesia
  • Hamzah Umar Teknik Geologi, Universitas Mulawarman, Jl. Sambaliung No.9 Samarinda 75119, Indonesia
  • Chairul Ikhwan Teknik Geologi, Universitas Mulawarman, Jl. Sambaliung No.9 Samarinda 75119, Indonesia
  • Mifta Sardilla Teknik Geologi, Universitas Mulawarman, Jl. Sambaliung No.9 Samarinda 75119, Indonesia

DOI:

https://doi.org/10.20956/geocelebes.v5i1.13108

Keywords:

slope stability analysis, dynamic safety factor, Bishop Simplified

Abstract

PT Belayan Internasional Coal is an open-pit system mining company, one of its geotechnical activities is the construction of the slopes. Slope stability analysis used the Bishop Simplified method to obtain the value of the dynamic safety factor (≥ 1,1). Currently, the value of the Safety Factor (FK) is an indicator in determining whether the slope is stable or not. The parameters used in the slope stability analysis are the physical and mechanical properties of the rock, namely weight (ɣ), cohesion value (c), and internal shear angle (∅). From the results of dynamic overall slope calculations, the recommended overall slope is constructed with an individual slope angle of 55°, a bench width of 5 meters, a height of 10 meters, and the number of individual slopes of 8 slopes. This design will produce dimensions of the overall slope with 41° slope angle, 80 meters high, and has a dynamic safety factor value of 1,102 with the water-saturated condition. Thus, the slopes are in stable condition.

References

Arif, I. 2010. Geoteknik Tambang. Program Studi Teknik Pertambangan ITB. Bandung. 2010.

Bester, M., Nel, E., & Gavigan, G. 2013. A Strategic Approach to the Design and Implementation of anEffective Mine Dewatering System, Slope Stability (page.1-16). Australian Centre for Geomechanics. Brisbane.

Golder Associates. 2018. Geotechnical Investigation for Pitand Waste Dump Studies Report.

Johansson, J. 2014. Impact of Water-Level Variations on Slope Stability. Lulea University of Technology.

LAPI ITB, PT. 2017. Studi Pengaruh Getaran Peledakan Terhadap Perumahan Penduduk dan Evaluasi Kestabilan Lereng Tambang PT Kuansing Inti Makmur Site Muara Bungo. Jambi.

Muntohar, A.S. dan Saputro, R.I. 2014. Pengaruh Kedalaman Muka Air Tanah Awal Terhadap Analisis Stabilitas Lereng Tak Jenuh. Seminar Nasional X – 2014. Teknik Sipil ITS Surabaya pp. 985-990.

Sugianti, K. 2013. Pengaruh Muka Airtanah terhadap Kestabilan Lereng pada Ruas Jalan Raya Cadaspangeran, Sumedang. Riset Geologi Tambang, 22(2), 117-125. https://doi.org/10.14203/risetgeotam2012.v22.62

Downloads

Published

2021-04-29

How to Cite

Syam, M. A., Heriyanto, H., Umar, H., Ikhwan, C., & Sardilla, M. (2021). ANALISIS KESTABILAN LERENG HIGHWALL MENGGUNAKAN METODE BISHOP SIMPLIFIED PADA PIT 13 PT BELAYAN INTERNASIONAL COAL KECAMATAN MARANGKAYU KABUPATEN KUTAI KARTANEGARA. JURNAL GEOCELEBES, 5(1), 46–54. https://doi.org/10.20956/geocelebes.v5i1.13108

Issue

Vol. 5 No. 1: April 2021

Section

Articles

License

Authors who publish with this journal agree to the following terms:

  1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
  2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).