@article{Yusim_Fadila_Sarwoko_2020, title={The Process of Testing For Valve Leaks On The KM. Kendhaga Nusantara Using A Hydrostatic Pressure Test}, volume={1}, url={https://journal.unhas.ac.id/index.php/zonalaut/article/view/11457}, DOI={10.62012/zl.v1i3.11457}, abstractNote={<p>The process of testing the leak on the valve on the important stages of vessels is carried out and regulated by the Biro<br />Klasifikasi Indonesian (BKI) as a Class which refers to the International Association of Classification Societies (IACS).<br />Pipes and fittings shall be tested by hydrostatic pressure not less than 1.5 times the nominal pressure. In this study, the 4<br />gate valves tested had a nominal pressure from the manufacturer of 10 bar, so they had to be tested up to a pressure of 15<br />bar. The valves have been tested one by one with the Hydrostatic Pressure Test method, using the Test Pump. From the test results found a leak in one of the valves, namely in the disc. The ecommendation given by BKI is to repair it by covering the leak using the material recommended rom the gate valve manufacturer using epoxy type iron glue.</p>}, number={3}, journal={Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan}, author={Yusim, Adi Kurniawan and Fadila, Muhammad Afif and Sarwoko, Sarwoko}, year={2020}, month={Nov.}, pages={78-83} }