Work Safety Analysis On Forklift And Crane Operating Systems To Prevent Work Accidents

Authors

  • Meysa Atika Puteri Departemen Teknik Kelauatan Universitas hasanuddin
  • Harianto Harianto Departement Of Ocean Enginering Of Hasanuddin University
  • Threevaldo Joan Saputra Departement Of Ocean Enginering Of Hasanuddin University
  • Musdalifah Akbar Simanjuntak Departement Of Ocean Enginering Of Hasanuddin University
  • Edwin Randalangi Departement Of Ocean Enginering Of Hasanuddin University
  • Athira Salsabila Departement Of Ocean Enginering Of Hasanuddin University
  • Andi Hamril Vikri Al Farisi Departement Of Ocean Enginering Of Hasanuddin University

DOI:

https://doi.org/10.62012/zl.v3i1.20551

Keywords:

Lifting Equipment, Forklift, Crane, Work Safety

Abstract

The propeller is a key component in ship propulsion as a means of producing thrust to move the ship. The damage that At any time in the work process there is always the possibility of work accidents. Forklifts and cranes are lifting and transport aircraft that support the implementation of the production process or work with a fairly high potential for danger. In this study, we will discuss in more depth what forklifts and cranes are, what are their advantages and disadvantages, what are their uses, and what important components are found in forklifts and cranes. Therefore, there is a need for an analysis of the use of lifting equipment to be used in order to produce the right alternative lifting equipment in carrying out a job. This research was conducted using a descriptive method that provides an overview of the application of work safety regulations in the operation of forklifts and/or cranes. The results of this study will then be evaluated so that an improvement can be determined so that the operation of forklifts and cranes can be safe. This research was conducted using a descriptive method that provides an overview of the application of work safety regulations in the operation of forklifts and/or cranes. The results of this study will then be evaluated so that an improvement can be determined so that the operation of forklifts and cranes can be safe.

Downloads

Download data is not yet available.

References

M. D. Khairansyah, “Pembuatan Aplikasi Inspeksi Dan Reminder Inspeksi Pesawat Angkat Dan Angkut ( Crane Dan Forklift ) Di Pt . Pal Indonesia ( Persero ) Berbasis Android,” no. 2581, pp. 241–245, 2000.

A. Razaq and F. Hamzah, “Perancangan dan Analisa Konstruksi Gantry Crane SWL 35 Ton di PT F1 Perkasa,” Proc. Conf. Des. Manuf. Eng. its Appl., vol. 1, no. 1, pp. 077–083, 2018.

J. R. Wiratama and G. Soeharsono, “Perancangan Semi Gantry Crane Kapasitas 10 Ton Dengan Bantuan Software,” Poros, vol. 12, no. 1, p. 25, 2017, doi: 10.24912/poros.v12i1.680.

A. D. Dermawan, I. P. Sindhu, and A. Ruddianto, “Perancangan Mekanisme Angkat Boatlift Crane yang Sinkron dengan Kapasitas Swl 15 Ton pada PT . F1 Perkasa,” Proc. Conf. Des. Manuf. Eng. its Appl., vol. 1, no. 1, pp. 039–049, 2018.

J. Jalil, “Analisa Kekuatan Gantry Crane Tipe Ect-15 Pada Saat Di Gunakan Di Pelabuhan Kijing, Pontianak, Kalimantan Barat”, zonalaut, vol. 2, no. 1, hlm. 25-29, Mar 2021.

Eurocrane, “Cina Derek Gantry Tugas Berat Produsen,” 2021. http://id.eurocranegroup.com/gantry

Published

2022-03-30

How to Cite

[1]
M. A. Puteri, “Work Safety Analysis On Forklift And Crane Operating Systems To Prevent Work Accidents”, zonalaut, vol. 3, no. 1, pp. 32-37, Mar. 2022.

Issue

Section

Port Management and Coastal Of Human Resource Development