Design and Construction of a Wood Powder Press Machine For Making Particle Board as a Supporting Means For Practical Activities
Rancang Bangun Mesin Press Serbuk Kayu Pembuatan Papan Partikel Sebagai Sarana Penunjang Kegiatan Praktikum
DOI:
https://doi.org/10.24259/perennial.v20i1.30787Keywords:
Effective, Efficient, Manual, Particleboard, Practicum, SawdustAbstract
This research activity studies the design of particle board press machines using iron plate materials and manual labor-based hydraulic presses. This research aims to produce a work tool that can facilitate the continuity of processing sawdust into particle boards so that practical activities can be carried out effectively and efficiently while still paying attention to the values determined in the practicum. The research method is carried out using the study of existing tools and will be made another tool with more straightforward work by analyzing the factors of weakness in existing tools. The working mechanism of the sawdust press machine to be made is manual, using human power, and the sawdust press machine is intended for practical student activities in the laboratory.
References
Ngadianto, A., Widyorini, R., Lukmandaru, G. (2019). Resistance of Mahogany and Sengon Wood Waste Particle Board with Liquid Smoke Preservation Treatment against Attacks by Drywood Termites (Cryptotermes cynocephalus Light). Journal of Proceedings of the National Seminar of the Indonesian Wood Research Society (Mapeki) XIV.
Aisha. (2013). Characterization of Waste Glass Results from Vitrification of High Level Liquid Waste. Journal of Waste Management Technology, 16(1), 13-22
Chaturvedi, R., Pappu, A. (2016). Performance of formaldehyde resins and cement bonded particleboards and understanding their properties for further advancement. International Journal of Waste Resources, 6(2), 1–8. doi: 10.4172/2252- 5211.1000215.
Iskandar, MI., and Supriadi, A. (2010). Effect of adhesive content on the properties of palm fruit bunch particle board. Forest Products Research Bulletin 16(2). Center for Research and Development of Forest Products. Bogor
Kliwon, S. and MI Iskandar. (2010). Flat Particle Board Products Based on Wood Raw Materials. Center for Research and Development in Forestry Engineering and Forest Product Processing. Bogor
Malik U. (2012). Research on various types of processing waste wood for selecting raw materials for charcoal briquettes. Junal Imiah Edu Research, 1(2): 21- 26.
Maulana, LF, Imami Ghozali, H., Fikri, MH, Agustina, EI, & Ali, M. (2020). Utilization of wood dust waste in Ranjok Village, Gunung Sari District, West Lombok Regency into Biomass Pellets as a Renewable Energy Source. PEPADU Journal, 1(1), 133–138. https://doi.org/10.29303/jurnalpepadu.v1i1.87
Steiger, L., Erlangga. (2010). Wood Construction- Basics (Building Materials- Construction- Components –Conclusion).
Luthfianto, S. and Nurkhanifah, N. (2020). Innovation of Plastic Waste and Coffee Skins into Paving Blocks in Penakir Village, Pemalang. Dinamisia: Journal of Community Service, 4(1), pp. 176-185
Rachman O and Malik J. (2011). Sawmilling and Wood Machining for the Indonesian Timber Industry. Forestry Research and Development Institute, Jakarta.
Rianto (2019). Potential and Utilization of Sawmill Waste in Wood Stands in West Manokwari District. Papuasian Forestry Journal 5 (1): 33–41 (2019)
Wahyudi. (2013). Sawmill Basics. Yogyakarta: Tree of Light.
Wulandari, FT, (2017). Teaching materials for Forest Products Industrial Waste Processing.
Wulandari, FT (2013). Composite Board Products Using Non-Wood Waste. Media Bina Ilmiah Volume 7/6 December 2013. Forestry Study Program, Faculty of Agriculture. UNRAM. Mataram.
Zhang, J., Song, F., Tao, J., Zhang, Z., Shi, SQ. (2018). Research progress on formaldehyde emission of wood-based panels. International Journal of Polymer Science, 2018. doi: 10.1155/ 2018/9349721.
