Anatomical Characterization and Fundamental Compression Behaviour of Kenaf (Hibiscus cannabinus L.) for Potential Oriented Strand Board (OSB) Application
Karakterisasi Anatomi dan Perilaku Kompresi Fundamental Kenaf (Hibiscus cannabinus L.) untuk Potensi Aplikasi Oriented Strand Board (OSB)
DOI:
https://doi.org/10.24259/perennial.v22i1.50033Keywords:
Kenaf Anatomy, Kenaf Core, Natural Fibre Composites, Oriented Strand Board, Wood-Based PanelsAbstract
This study evaluates the anatomical characteristics and basic mechanical behaviour of kenaf (Hibiscus cannabinus L.) core with the objective of assessing its suitability as a raw material for oriented strand board (OSB). Anatomical observations (cross, radial and tangential sections) revealed three distinct stem components (bast, core, pith) and showed variation in fibre and vessel element lengths along the stem (top, middle, bottom). Compression testing perpendicular to the grain provided baseline mechanical data relevant to strand production and panel performance. Based on anatomical features and compression response, kenaf core is proposed as a viable alternative biomass feedstock for wood-based composites such as OSB, particularly for short-rotation and urban biomass sources. The work demonstrates promise but highlights the need for further quantitative processing and full-scale panel manufacture/testing (modulus of rupture, modulus of elasticity, internal bond, dimensional stability) to confirm industrial feasibility.
References
Ahmad, N., Ab Malek, A. I., Wan Abdul Rahman, W. M. N., Mohd Nor, M. Z., & Mohamed Tamat, N. S. (2025). Low-density particleboard from kenaf core and kelempayan particles. Bioresources and Environment, 3(1), 69–75. https://doi.org/10.24191/bioenv.v3i1.83.
Akil, H. M., Omar, M. F., Mazuki, A. A. M., Safiee, S., Ishak, Z. A. M., & Bakar, A. A. (2011). Kenaf fiber reinforced composites: A review. Materials & Design, 32(8–9), 4107–4121. https://doi.org/10.1016/j.matdes.2011.04.008.
Ansong, G., Fiagbe, Y. A. K., Tetteh, A. Y., & Davis, F. (2023). Tensile strength and elongation of selected kenaf fibres of Ghana. Cogent Engineering, 10(1), 2202036. https://doi.org/10.1080/23311916.2023.2202036.
Han, S. N. M. F., Taha, M. M., Mansor, M. R., & Rahman, M. A. A. (2022). Investigation of tensile and flexural properties of kenaf fiber-reinforced ABS composites fabricated by fused deposition modeling. Journal of Engineering and Applied Science, 69, 52. https://doi.org/10.1186/s44147-022-00109-0.
Hossain, M. S., Dewan, M. W., & Hosur, M. V. (2021). Recent advances in natural fiber reinforced composites: Development, characterization, and applications. Journal of Natural Fibers, 18(4), 551–573. https://doi.org/10.1080/15440478.2019.1604340.
Huang, Y., Sultan, M. T. H., Shahar, F. S., Łukaszewicz, A., Oksiuta, Z., & Grzejda, R. (2025). Kenaf fiber-reinforced biocomposites for marine applications: A review. Materials, 18(5), 999. https://doi.org/10.3390/ma18050999.
Ilyas, R. A., Sapuan, S. M., & Ishak, M. R. (2020). Isolation and characterization of nanocrystalline cellulose from sugar palm fibers (Arenga pinnata). Carbohydrate Polymers, 227, 115356. https://doi.org/10.1016/j.carbpol.2019.115356.
Khairul Izwan, K. N., Ali Rahman, A., Nazirah Mohd Apandi, N., Shamsol, A. S., & Ahmad Zailani, W. W. (2023). A study of physical and mechanical properties using kenaf core as coarse aggregate replacement in concrete. Scientific Research Journal, 20(2), 1–17. https://doi.org/10.24191/srj.v20i2.22140.
Khalil, H. P. S. A., Bhat, A. H., & Yusra, A. F. I. (2010). Green composites from sustainable cellulose nanofibrils: A review. Carbohydrate Polymers, 87(2), 963–979. https://doi.org/10.1016/j.carbpol.2011.08.078.
Misnon, M. I., Rizal, F. N. M., Nor, M. Z. M., & Yahya, M. F. (2025). Kenaf fibre valorisation: A comparative study of processing effects on materials properties and yarn conversion potential. Discover Materials, 5, 236. https://doi.org/10.1007/s43939-025-00380-x.
Mohanty A.K., A. K., Misra, M., & Drzal, L. T. (2005). Natural fibers, biopolymers, and biocomposites. Boca Raton, USA: CRC Press. https://doi.org/10.1201/9780203508206.
Mohd Nor, M. Z., Wan Abdul Rahman, W. M. N., Sarmin, S. N., Lee, S. H., Ahmad, N., & Khalid, M. H. (2025). Oriented strand board made from tropical plantation wood with the inclusion of kenaf core at different resin content. BioResources, 20(3), 6206–6217. https://doi.org/10.15376/biores.20.3.6206-6217.
Rowell, R. M. (2012). Handbook of wood chemistry and wood composites (2nd ed.). Boca Raton, USA: CRC Press. https://doi.org/10.1201/b12487.
Saad, M. J., & Kamal, I. (2012). Mechanical and physical properties of low-density kenaf core particleboards bonded with different resins. Journal of Science and Technology, 4(1), 17–32.
Shubbar, R., Al-Khaleefa, L., & Hashim, K. (2024). Advances in bio-based composites: Opportunities and challenges for sustainable construction materials. Construction and Building Materials, 412, 133089. https://doi.org/10.1016/j.conbuildmat.2023.133089.
Yusri, M. A. H. M., Zuhri, M. Y. M., Ishak, M. R., & Azman, M. A. (2023). The capabilities of honeycomb core structures made of kenaf/polylactic acid composite under compression loading. Polymers, 15(9), 2179. https://doi.org/10.3390/polym15092179.
