Performance of Starter Motor on KM. Bandar Nelayan 519 Main Engine Operation.
Main Article Content
Abstract
The starter motor is one component of the starting system on the main engine which is used as an initial drive so that the main engine can rotate and carry out the combustion process in the combustion chamber. The aim of the research was to determine the performance of the starter motor during the operation of the main engine KM. Bandar Nelayan 519 through a quantitative approach. The results of measurements and calculations show the rotational speed obtained is 462.4 rpm, the power is 7.5Kw comes from two batteries with a voltage of 24V and a capacity of 200 Ah. The torque produced by the starter motor to drive a 10-cylinder Nissan diesel engine that has 132 gears is 443.24 Nm with an electric current of 312 A and 0.07 Ω resistance. This research calculates the performance of the starter motor because it is very influential on the starting process of the main engine, where weak performance will make it difficult to start the engine.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.
Deprecated: json_decode(): Passing null to parameter #1 ($json) of type string is deprecated in /home/journal33/public_html/plugins/generic/citations/CitationsPlugin.inc.php on line 49
References
M. Komaro and E. Daryanto, “Jurnal Insinyur Profesional,” vol. 2, no. 2, pp. 48–55, 2023.
A. P. Wiyastra, M. S. Baskoro, and F. Purwangka, “Instalasi Permesinan Pada Kapal Psp 01,” J. Teknol. Perikan. dan Kelaut., vol. 3, no. 1, pp. 35–43, 2017, doi: 10.24319/jtpk.3.35-43.
W. Arismunandar, Penggerak mula motor bakar torak, vol. 2. Bandung: ITB, 1983.
A. K. Samlawi, “Teori Dasar Motor Diesel,” J. Tek. Mesin, p. 75, 2012.
Buntarto, Dasar-dasar kelistrikan otomotif, 1st ed. Yogyakarta: Pustaka Baru Press, 2015.
R. J. Fowler, Electricity:Principle & Aplications, 8th ed. New York: McGraw-Hill, 2013.
D. R. . Bansal, Engineering Mechanics, 1st ed. Yogyakarta: Andi, 2018.
Sugiyono, Metode penelitian kuantitatif, 1st ed. Bandung: Alfabeta, 2018.
H. Firdaus, E. Rustendi, and A. Herdiana, “Analisis Konsumsi Arus Listrik Pada Mobil Multi Purpose Vehicle,” J. Ilm. Teknol. Infomasi Terap., vol. 8, no. 1, pp. 150–158, 2021, doi: 10.33197/jitter.vol8.iss1.2021.736.
P. Klasifikasi, K. Bagian, and K. Samudra, “PERATURAN INSTALASI MESIN Edisi Konsolidasi 2022 Biro Klasifikasi Indonesia,” vol. III, 2022, [Online]. Available: www.bki.co.id