The Process of Testing For Valve Leaks On The KM. Kendhaga Nusantara Using A Hydrostatic Pressure Test

Main Article Content

Adi Kurniawan Yusim
Muhammad Afif Fadila
Sarwoko Sarwoko

Abstract

The process of testing the leak on the valve on the important stages of vessels is carried out and regulated by the Biro
Klasifikasi Indonesian (BKI) as a Class which refers to the International Association of Classification Societies (IACS).
Pipes and fittings shall be tested by hydrostatic pressure not less than 1.5 times the nominal pressure. In this study, the 4
gate valves tested had a nominal pressure from the manufacturer of 10 bar, so they had to be tested up to a pressure of 15
bar. The valves have been tested one by one with the Hydrostatic Pressure Test method, using the Test Pump. From the test results found a leak in one of the valves, namely in the disc. The ecommendation given by BKI is to repair it by covering the leak using the material recommended rom the gate valve manufacturer using epoxy type iron glue.

Downloads

Download data is not yet available.

Article Details

How to Cite
Yusim, A. K., Fadila, M. A., & Sarwoko, S. (2020). The Process of Testing For Valve Leaks On The KM. Kendhaga Nusantara Using A Hydrostatic Pressure Test. Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan, 1(3), 78–83. https://doi.org/10.62012/zl.v1i3.11457
Section
Offshore Building Technology and Engineering

References

Grammenos, C. T. 2010. “The Handbook of Maritime Economics 2nd. Ed". Cornwall: Exeter Premedia Services, MPG Books.

Malvino, K. “www.emaritim.com”, 11 Agustus 2017. [Online]. Available: https://www.emaritim.com/2017/08/ledakan-km-kendhaga-nusantara-berasal.html. [Accessed 05 Juny 2020].

Peter Smith, R. W. Zappe, Valve Selection Handbook: Engineering Fundamentals for Selecting the Right Valve Design for Every Industrial Flow Application, Fifth Edition, Elsevier, USA, 2004.

Marine Machinery, Engines & Controls. “www.brighthubengineering.com”, 30 Juni 2009. [Online]. Available: https://www.brighthubengineering.com/marine-engines-machinery/41043-procedure-of-sw-pump-sea-chest-cleaning/. [Accessed 05 July 2020].

Biro Klasifikasi Indonesia. 2016. “Rules for Machinery Volume III”. Jakarta: Biro Klasifikasi Indonesia.

Similar Articles

<< < 1 2 3 > >> 

You may also start an advanced similarity search for this article.