Job Safety Analysis: Identifying Potential Hazards An Effort To Prevent Work Accidents In Ship Replating And Coating Works At PT. Dock And Shipping Surabaya (Persero)
Article Sidebar
Main Article Content
Abstract
The use of modern machinery and installations and hazardous materials is increasing. In addition, a work environment that does not meet the requirements for occupational safety and health, hazardous work processes and nature, as well as an increase in the intensity of the operational work of the workforce, affects the increase in the number and seriousness of work accidents. The type of research used is descriptive quantitative research so that the data entered are in the form of words, sentences and pictures, which are then scored to determine the level of danger before carrying out the work. In conducting a job safety analysis, what is done is to determine the work to be analyzed, divide the work into several work steps or standard operating procedures, identify potential hazards, risk assessment, evaluate risk and determine the level of risk and prevention. The assessment of the risk value analysis on replating work has a value of up to 8, indicating the need for control measures in the process. Then the coating work on the fuel area and main deck also have a risk value of 8, so it is also necessary to take control measures on the coating process in that area.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.
References
Abduh, M., Sahputra, R. J. and Boris, B. (2010) ‘Pengelolaan faktor non-personil untuk pencegahan kecelakaan kerja konstruksi’, Konferensi Nasional Teknik Sipil 4 (Konteks 4), 4(KoNTekS 4), pp. 255–262. Available at: http://ftsl.itb.ac.id/kk/manajemen_dan_rekayasa_konstruksi/wp-content/uploads/2010/10/konteks-4-ma2.pdf.
Cooper, D. F. (2007) ‘Tutorial Notes on the Australian and New Zealand Standard on Risk Management, AS/NZS 4360:2004’, Broadleaf capital international, pp. 1–6.
Djajaningrat, H. and Praptono, R. (2009) Sistem Manajemen Keselamatan dan Kesehatan Kerja OHSAS 18001. ke 1. Edited by M. K. R. P. Husjain Djajaningrat, AMAK, SKM. Jakarta: Dian Rakyat.
Mahendar, F. and Pujutomo, D. (2014) ‘Identifikasi Bahaya, Pengendalian Resiko Dan Keselamatan Kerja Pada Bagian Bengkel Repair Galangan Kapal Dengan Menggunakan Metode Job Safety Analysis (Jsa) Di Pt Janata Marina Indah, Semarang’, Industrial Engineering Online Journal, 3(2). Available at: https://ejournal3.undip.ac.id/index.php/ieoj/article/view/6307.
Michaud, P. A. and Michaud, P. A. (2018) ‘Job Hazard Analysis’, Accident Prevention and Osha Compliance, 2002, pp. 25–29. doi: 10.1201/9781315136578-6.
Rizka Pisceliya, D. M. and Mindayani, S. (2018) ‘Analisis Kecelakaan Kerja Pada Pekerja Pengelasan Di Cv. Cahaya Tiga Putri’, Jurnal Riset Hesti Medan Akper Kesdam I/BB Medan, 3(1), p. 66. doi: 10.34008/jurhesti.v3i1.25.
Soehatman Ramli (2013) ‘Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management’, Pedoman Praktis Manajemen Risiko dalam Perspektif K3 OHS Risk Management.
Suyono, K. Z., and Nawawinetu, E. D. (2013) ‘Work Safety with Safety Behavior at PT DOK and shipping in Surabaya Unit Hull Construction’, Thee Indonesian Journal of Occupation Safety and Health, 2, pp. 67–74.