Steering Gear System Testing During Sea Trial Archipelago Belt Pioneer Ship 750 DWT
Article Sidebar
Main Article Content
Abstract
In the sea trial, many things were tested, one of which was the steering gear test. This test aims to determine the time it takes the ship to turn at a certain angle according to the provisions of the Biro Klasifikasi Indonesia (BKI) and check the function of the steering system. On the Sabuk Nusantara 750 DWT Pioneer Ship carried out two types of tests, namely the main steering gear and the auxiliary steering test. The main steering gear test is carried out in a series of tests with a joystick on the steering gear panel on the ship's bridge. Auxiliary steering test is divided into two types, namely using the steering wheel and solenoid which is located in the engine room. Testing the steering gear on this archipelago belt pioneer ship meets the requirements of BKI.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.
References
Sarifuddin, Mantoro, B., Amrullah, R.A, Saputra, I.D, "Kebocoran pada pompa hidrolik steering gear dengan satu rudder di kapal MT.Pelita Energi", Prosiding Seminar Bidang Teknika Pelayaran, Volume 6, p. 01 – 08, 2017.
Molland, Anthony F., 2007, The Maritime Engineering Reference Book: A Guide to Ship Design, Construction and Operation 1st Edition, UK: Butterworth-Heinemann.
Amiruddin, W., Hadi, E. S., Kiryanto, "Pemanfaatan Material Plastik Hdpe Bekas Drum Kemasan Sebagai Kulit Lambung Perahu", KAPAL: Jurnal Teknik Perkapalan, vol. 11, no. 03, p. 162 – 167, 2014.
BKI Rule, 2019, Guidance for Sea Trials of Motor Vessels (Vol B). [Accessed 01 April 2020].
Sugiyono, 2009, Metode Kuantitatif Kualitatif dan R&D, Bandung: Alfabeta.