Technical Study of Type B - Series and Kaplan Propellers with Rake Angle Variations on the Offshore Supply Vessel 80 (OSV 80)
Article Sidebar
Main Article Content
Abstract
The propeller is one part of the ship that is driven by the engine, which has the function of obtaining thrust for the speed of the ship so that the propeller must be able to withstand the forces acting on the blade due to hydrodynamic loads. Propellers are divided into two types, one of which is the Fixed Pitch Propeller (FPP). The speed on the ship is inseparable from a good propeller design in order to get optimal thrust generated by the propeller motion. This research was conducted because of the frequent occurrence of losses and cracks in the propeller leaves. The purpose of this study is to determine the optimum propeller thrust value from the analysis of the rake angle variation model made so that it can be seen which model variation has the highest thrust and torque values and to determine the comparison of the thrust values resulting from the B-Series and Kaplan model variations. This research method uses Computational Fluid Dynamic (CFD) simulations. The hypothesis from the variation simulation study that the angle influences the thrust value of the ship as well as the thrust comparison value and the flow pattern and contours is obtained from the model with the same dimensional and rotation analysis parameters and the highest efficiency value is obtained on the B-Series and Kaplan propeller models. with maximum rake angle variation.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.
References
L. Y. Sutadi, S. A. Widyanto and I. Haryanto, " Jurusan Teknik Mesin Politeknik Negeri Semarang," PERANCANGAN MEKANISME PENGONTROL CONTROLLABLE PITCH PROPELLER, pp. 12-17, 2012.
D. B. Darmawan, D. Chrismianto and M. Iqbal, "Teknik Perkapalan, Fakultas Teknik, Universitas Diponegoro," ANALISA PENGARUH SUDUT KEMIRINGAN HUB PROPELLER, Vols. Vol 4, No 2, pp. 352-361, 2016.
A. P. Wicaksono and A. Winarno, "Analisa Pengaruh Posisi Wake Equalizing Duct Terhadap Gaya Dorong (Thrust) Pada Kapal Ikan Tradisional Purse Seine. [Skripsi]," Surabaya : Universitas Hang Tuah. , 2022.
B. A. Mahaputra, A. F. Zakki and I. P. Mulyatno, "Departemen Teknik Perkapalan, Fakultas Teknik, Universitas Diponegoro," Analisis Pengaruh Konfigurasi Perubahan Sudut Rake Propeller B5-80 Terhadap Fatigue Life pada Kapal Kontainer 3600 TEUs, Vols. Vol. 8., No. 3, pp. 301-311, 2020.
I. T. T. C. ITTC, "International Towing Tank. Conference. ITTC," International Towing Tank. Conference. ITTC, 2011. [Online]. Available: International Towing Tank. Conference. ITTC.
S. Klara, M. I. Nikmatullah and M. Faizal, "“Efektivitas Keel Cooler Pada Sistem Pendingin Mesin Penggerak Utama Kapal”," zonalaut, Vols. Vol. 3, No. 3, pp. 10-17, 2022.
A. S, R. F and S. D, "Analisis Ship Resistance Untuk Menentukan Daya Main Engine Kapal," zonalaut, Vols. Vol. 3, No.2 , pp. 19-24, 2022.
W. A, C. G, I. A and W. A. S., "Experiment Study of the Resistance on Nusantara Ship Hull Modification with Fishing Boat in Pantura East Java," International Journal on Engineering Applications (IREA), pp. 11 (2),, pp. 111-120., 2023.