HEXAMUF Interior Design As A Solution To Space Limitations On Tourism Ship

Main Article Content

Agung Prasetyo Utomo
Septaviola Dini Utami
Rizki Aris Setyawan
Ahmad Andrei Setiawan

Abstract

Interior design is the process of designing and planning a room by prioritizing the aspects of beauty, comfort, and function of the room. With the development of time, a room is required to provide more functions supported by adequate furniture
even with a limited space capacity like the room on a ship. This research will design an item of furniture with a primary function and several secondary functions so that it can reduce the use of more furniture in space. This study applies anthropometric calculations to produce ergonomic furniture dimensions and is friendly to the human body shape. Besides,
the design made does not leave the beauty aspect by taking a modern minimalist concept. This design takes a natural form from a beehive which is considered to have advantages in terms of structure and is easy to mix and match with one
another. This research produces a sofa design as a primary function as a seat and bed, and a secondary function as a table and chairs. This sofa can be assembled as needed so that it gets a secondary function which is very suitable for use in a space that is not too large like the room on a tourist ship.

Downloads

Download data is not yet available.

Article Details

How to Cite
Utomo, A. P., Utami, S. D., Setyawan, R. A., & Setiawan, A. A. (2020). HEXAMUF Interior Design As A Solution To Space Limitations On Tourism Ship. Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan, 1(1), 11–15. https://doi.org/10.62012/zl.v1i1.9652
Section
Design of Fishery and Ocean Building Product

References

Grace Mulyono, Jurusan Desain Interior, Fakultas Seni dan Desain, Universitas Kristen Petra - Surabaya, DIMENSI INTERIOR, VOL. 8, NO. 1, JUNI 2010: 44-51 46

Desain Prototipe Meja dan Kursi Pantai Portabel dengan Integrasi Pendekatan Ergonomi, Value Engineering dan Kansei Engineering, Nora Yuanita Restantin1, Mirwan Ushada1*, Makhmudun Ainuri1, Jurnal Teknik Industri, Vol. 14, No. 1, Juni 2012, 53-62 ISSN 1411-2485 print / ISSN 2087-7439 online

Desain Furnitur Meja dan Kursi Multifungsi untuk Apartemen Tipe Studio, Penulis Tagor Sean Reinhard, dan Drs. Taufik Hidayat MT., JURNAL SAINS DAN SENI POMITS Vol. 3, No.1, (2014) 2337-3520 (2301-928X Print)

Ahmad Abtokhi, Dkk. 2007). Pertimbangan Antropometri pada Pendesainan. Yogyakarya: Seminar Nasional III SDM Teknologi Nuklir.

Tri Prasetyo Utomo. 2010. Estetika Arsitektur dalam Perspektif Teknologi dan Seni. Surakarta: Fakultas Seni Rupa dan Desain ISI Surakarta

Similar Articles

<< < 1 2 3 4 5 6 7 

You may also start an advanced similarity search for this article.