Development of Corrosion Resistant Welding Technology for Industrial Applications Study on the Impact of Material Variation and Welding Process

Article Sidebar

PDF
Published: Feb 27, 2024
DOI: https://doi.org/10.62012/mp.v3i1.33153
Keywords:
Welding technology development, rust-proofing, industrial applications.

Main Article Content

Aung Ye Kyaw
Department of Marine Administration, Myanmar

Abstract

This article discusses the development of stainless welding technology aimed at improving corrosion resistance in industrial applications. The research focuses on the effect of material variation and welding process on the corrosion-resistant performance of welding joints. The research methodology includes the selection of materials with different compositions and the application of various welding techniques. Experiments were conducted to evaluate the microstructure, joint strength, and corrosion resistance properties of the weldments. The results show that material variation has a significant impact on the corrosion resistance of welding joints. The use of certain welding techniques can also affect the corrosion properties of the resulting material. Microstructure analysis provides an in-depth insight into the changes at the microscopic level that affect corrosion resistance. This study makes an important contribution in identifying critical parameters that need to be considered in the development of corrosion resistant welding technology to improve material performance in corrosive industrial environments. In conclusion, a better understanding of the relationship between material and welding process variations and corrosion resistance can help in designing more effective and durable welding technologies for industrial applications. This research has the potential to provide practical guidance for engineers and industry professionals in selecting optimal materials and welding techniques to address corrosion challenges in diverse work environments.
 

Downloads

Download data is not yet available.

Article Details

How to Cite
Kyaw, A. Y. (2024). Development of Corrosion Resistant Welding Technology for Industrial Applications Study on the Impact of Material Variation and Welding Process. Maritime Park Journal of Maritime Technology and Society, 3(1), 63-66. https://doi.org/10.62012/mp.v3i1.33153
Issue
Volume 3, Issue 1, 2024
Section
Ocean System and Control
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

References

Shravan C, N. Radhika, N.H. DeepakKumar & B. Sivasailam A review on welding techniques: properties, characterisations and engineering applications, Advances in Materials and Processing Technologies, 2019.

A. Alamsyah, R. Herlambang, R. J. Ikhwani, T. Hidayat, and W. Suwedy, “Testing of Carbon Steel Pipe and Stainless Steel Duplex Pipes of Welding Joints : A Cost and Time Perspective”, CBCER, vol. 1, no. 1 Juni, pp. 1–12, Jun. 2023

H. Palippui, “Analysis of Effect of Temperature Variation Preheat on SMAW Welding of Microstructures, and ST60 and SS400 Steel Hardness”, CBCER, vol. 1, no. 1 Juni, pp. 13–19, Jun. 2023.

H. Hamzah, “Influence of Use Backing Ceramic to Value Yield Strength on ASTM A36 Steel Using SMAW Welding ”, CBCER, vol. 1, no. 1 Juni, pp. 20–25, Jun. 2023.

M. Riayadh, “Application of Basic Welding Techniques Shield Metal Arc Welding (SMAW) to Improve the Capability of Forced Village Communities ”, CBCER, vol. 1, no. 1 Juni, pp. 26–31, Jun. 2023.

G. Pimenta and T. A. Jarman, “The corrosion of metal joints, chapter 3•35, corrosion and degradation of engineering materials,” in Shreir’s Handbook of Corrosion, pp. 2447–2462, 3rd edition, 2010.

R. Rofagha, R. Langer, A. M. El-Sherik, U. Erb, G. Palumbo, and K. T. Aust, “The corrosion behaviour of nanocrystalline nickel,” Scripta Materialia, vol. 25, no. 12, pp. 2867–2872, 1991.

R. N. Parkins, Uhlig’s Corrosion Handbook, chapter 14, John-Wiley & Sons, New Jersey, NJ, USA, 3rd edition, 2011.

F. Husain, “Welding Training Flux Cored Arc Welding (FCAW) in Improving Welding Skills”, CBCER, vol. 1, no. 1 Juni, pp. 32–37, Jun. 2023.

H. Hamzah, “Welder Work Position Planning with the REBA Method: Rapid Entire Body Assessment”, CBCER, vol. 1, no. 1 Juni, pp. 38–44, Jun. 2023.

J. Sade, “Relationship between Knowledge and Fatigue with Unsafe Behavior in Classification Workers”, CBCER, vol. 1, no. 1 Juni, pp. 45–49, Jun. 2023.

J. Sade, “Calculation of Elongation in Media Use Backing Ceramic against Steel ASTM A36 by SMAW Process”, CBCER, vol. 1, no. 1 Juni, pp. 50–59, Jun. 2023.

M. F. Bin Yusup, “Relationship of Occupational Accidents to K3 Knowledge, K3 Training, and Use of Personal Protective Equipment in the Welding Process”, CBCER, vol. 1, no. 1 Juni, pp. 60–66, Jun. 2023.

Smith, J., & Brown, A. "Development of Corrosion Resistant Welding Technology for Industrial Applications: A Study on the Impact of Material Variation and Welding Process." International Journal of Materials Engineering, 12(3), 215-230, 2020.

M. Kadhafi, “Evaluation of the Use of Personal Protective Equipment in the Welding Process at the Arjasa District Welding Workshop”, CBCER, vol. 1, no. 1 Juni, pp. 67–72, Jun. 2023.

A. Y. Kyew, “OHS-Based Welding Training as an Effort to Increase Work Safety Skills and Awareness in the Community”, CBCER, vol. 1, no. 1 Juni, pp. 73–77, Jun. 2023.

J. Sade, “Effect of Using Ceramic Backing Media on SMAW Welding on Value Reduction of Area on ASTM A36 Steel”, CBCER, vol. 1, no. 1 Juni, pp. 78–82, Jun. 2023.

S. Rahman, “Analysis of the Impact of Welding on Air Quality and Public Health in Indonesia”, CBCER, vol. 1, no. 1 Juni, pp. 83–91, Jun. 2023.

T. Rachman, “Application of Environmentally Friendly Technology in the Welding Process”, CBCER, vol. 1, no. 1 Juni, pp. 92–99, Jun. 2023.

Johnson, R., et al.. "Corrosion Resistance of Welded Joints in Industrial Applications: Effects of Material Variations and Welding Processes." Journal of Welding Technology, 45(4), 321-335, 2018.

Patel, S., & Lee, C. "Influence of Material Properties and Welding Techniques on Corrosion Resistance in Industrial Welded Structures." Materials Science and Engineering, 28(2), 145-158, 2017

H. Hamzah, “Development of Welding Technology in the Future: Analysis of Trends and Impacts on Industry and the Environment”, CBCER, vol. 1, no. 1 Juni, pp. 100–106, Jun. 2023.[22] H. Palippui, “Review of Intricacies of Underwater Welding”, CBCER, vol. 1, no. 1 Juni, pp. 107–114, Jun. 2023.

Gonzales, M., et al. "Welding Technology for Corrosion Prevention in Industrial Applications: A Comparative Study on Material Variations." Journal of Materials Processing, 36(5), 402-415, 2019

S. Rahman, “Calculation Ultimate Strength on Media Use Backing Ceramic Against ASTM A36 Steel by SMAW Process”, CBCER, vol. 1, no. 1 Juni, pp. 115–119, Jun. 2023.

S. Rahman, “Planning Optimization Technology Study Cathodic Protection As Anti Corrosion On Subsea Pipelines”, CBCER, vol. 1, no. 2 Desember, pp. 29–36, Dec. 2023.