Analysis of Welding Defects Using Down Hand Welding Techniques on the Hull Plate of a Ship
Article Sidebar
Main Article Content
Abstract
Shipbuilding nearly 2/3 of the work is welding work. There are several variations of the weld joint as an option based on the thickness and quality of the material, the method of welding. Welding results generally depend heavily on the skill of the welder. Weld damage both on the surface and on the inside is difficult to detect with a simple test method. In addition, because the structure being welded is an integral part of the entire body of the weld material, the cracks that arise will spread quickly and may even cause serious accidents. In general, welding on ships has requirements from the Classification Agency which supervises and provides the feasibility of the ship's construction strength. To meet these requirements, the role of the welder and technique is very large, so that the ship gets good welding quality and can be accepted by the shipowner and the classification agency.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.
Deprecated: json_decode(): Passing null to parameter #1 ($json) of type string is deprecated in /home/journal33/public_html/plugins/generic/citations/CitationsPlugin.inc.php on line 49
References
E. S. Hadi, “Analisa Pengelasan Mild Steel (St.42) Dengan Proses Smaw, Fcaw Dan Saw Ditinjau Dari Segi Kekuatan Dan Nilai Ekonomis,” Kapal, vol. 6, no. 2, pp. 107–117, 2012.
S. Wilastari, “Pentingnya Badan Klasifikasi Kapal Dalam Industri Maritim,” Din. Bahari, vol. 1, no. 1, pp. 27–30, 2020.
J. T. Perkapalan, “Analisis Variasi Sudut Kampuh Single V-Butt Joint Las Mig pada,” vol. 9, no. 1, pp. 1–10, 2021.
B. A. B. Ii, “PENDEKATAN PEMECAHAN MASALAH A . Grand Livina B . Engine Stand,” pp. 6–33.
A. Bakhori, “Perbaikan Metode Pengelasan Smaw ( Shield Metal Arc Welding ) Pada Industri Kecil Di Kota Medan,” Perbaikan Metod. Pengelasan Smaw ( Shield Met. Arc Weld. ) Pada Ind. Kecil Di Kota Medan, vol. 13, no. 1, pp. 14–21, 2017.
Syahnanda Hidayatullah, “Pejuang Mesin Scooter: Pengujian Dan Pemeriksaan Hasil Las,” 2010. [Online]. Available: http://santrinekatgmail.blogspot.com/2010/05/pengujian-dan-pemeriksaan-hasil-las.html.