Improvement Process for Plate Heat Exchanger Type of M15 at PT. Janata Marina Indah (JMI) Semarang

Article Sidebar

PDF (Bahasa Indonesia)
Published: Mar 11, 2020
DOI: https://doi.org/10.62012/zl.v1i1.9651
Keywords:
Repair, Plate Heat Exchanger, Gaskets.

Main Article Content

Adi Kurniawan Yusim
Prodi Teknologi Rekayasa Konstruksi Perkapalan Sekolah Vokasi Undip
Budi Utomo
Prodi Teknologi Rekayasa Konstruksi Perkapalan Sekolah Vokasi Undip
Suharto Suharto
Prodi Teknologi Rekayasa Konstruksi Perkapalan Sekolah Vokasi Undip
Hartono Hartono
Prodi Teknologi Rekayasa Konstruksi Perkapalan Sekolah Vokasi Undip

Abstract

Most of the heat exchangers onboard are in the form of shell and tube. Another form is the plate heat exchanger (PHE). The advantage of PHE is that it has a very large displacement surface at a small volume of tools. Selection of suitable gasket material for PHE is very important. It is intended for a long service life of PHE. The research has been conducted at the shipyard of PT. JMI Semarang to find out the location and cause of plate leakage from PHE. PHE observations and improvements are carried out when the ship is docked at the shipyard. Repairs were made directly in the form of operational data and manual book PHE type of M15.

Downloads

Download data is not yet available.

Article Details

How to Cite
Yusim, A. K., Utomo, B., Suharto, S., & Hartono, H. (2020). Improvement Process for Plate Heat Exchanger Type of M15 at PT. Janata Marina Indah (JMI) Semarang. Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan, 1(1), 6–10. https://doi.org/10.62012/zl.v1i1.9651
Issue
Volume 1, Number 1, March 2020 Edition
Section
Offshore Building Technology and Engineering
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.

References

R. Walikrom, A. Muin and Hermanto, "Studi Kinerja Plate Heat Exchaner pada Sistem Pendingin PLTGU," Turbulen: Jurnal Teknik Mesin, vol. I, no. 1, p. 40 – 47, 2018.

L. Jauhari, "http://bppp-tegal.com/," BPPP Tegal, 03 Desember 2012. [Online]. Available: http://bppp-tegal.com/v1/index.php?option=com_content&view=article&id=228:sistem-pendinginan-motor-diesel&catid=44:artikel&Itemid=85. [Accessed 05 February 2020].

F. Z. Dong, D. J. S. , Z. B. Zhang, M. Y. C., C. S. Y., K. Niu and L. C. X., "Internal leakage of plate heat exchangers caused by cooperation of pitting, crevice corrosion, and fretting," Engineering Failure Analysis, vol. 96, pp. 340-347, 2019.

A. Laval, "Alfa Laval M15," www.alfalaval.com, Lund, 2016.

A. Laval, "Gasketed plate and frame heat exchangers," Alfa Laval Corporate, Lund, 2019.

D. Ship, "https://dieselship.com/," Diesel Ship, 06 July 2019. [Online]. Available: https://dieselship.com/marine-technical-articles/marine-engineering-knowledge-general/plate-type-heat-exchanger/. [Accessed 09 February 2020].