Maintenance Of Winchlass Hydraulic Oil Pump In Supporting Mooring Un Mooring In Kl Sultan Hasanuddin 02

Article Sidebar

PDF
Published: Nov 27, 2024
DOI: https://doi.org/10.62012/zl.v5i3.42258
Keywords:
Windlass, Supervision, Maintenance

Main Article Content

Suyuti Suyuti
Makassar Maritime Polytechnic
Jamaluddin
Makassar Maritime Polytechnic
Musriady
Makassar Maritime Polytechnic
Muh Jafar
Makassar Maritime Polytechnic

Abstract

Windlass machine is a tool on a ship that is used to pull and lower anchors and is usually also used to moor ropes when the ship is docked at the dock. In its operation, this windlass machine consists of an anchor, anchor chain, windlass, hydraulic pump, electric motor. The hydraulic pump functions to convert mechanical energy into hydraulic energy by pressing the hydraulic fluid in the system to drive the main shaft of the anchor machine, to make it easier for the crew to lego and hibob anchors.


If in a less than optimal condition, it will disrupt the performance of the windlass and cause damage and shorten the service life. This happens because there is no maintenance and repair to avoid damage, especially to the hydraulic pump. This study aims to ensure that the performance of the windlass in its supervision and operation remains optimal in ship service.

Downloads

Download data is not yet available.

Article Details

How to Cite
Suyuti, S., Jamaluddin, Musriady, & Muh Jafar. (2024). Maintenance Of Winchlass Hydraulic Oil Pump In Supporting Mooring Un Mooring In Kl Sultan Hasanuddin 02. Zona Laut Jurnal Inovasi Sains Dan Teknologi Kelautan, 5(3), 332–337. https://doi.org/10.62012/zl.v5i3.42258
Issue
Volume 5, Number 3, November 2024 Edition
Section
Ocean Transportation Management and Shipping Technology Applications
Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.

References

[1] Fajar Tyas, 2022. Causes of Decreasing Hydraulic Anchor Windlass Pressure on the MT Transko Taurus Ship. Poltanesa Bulletin Vol. 23 No. 2 (December 2022) p-ISSN 2721-5350 e-ISSN 2721-5369.

[2] Aditya, Bagas Maheswara (2020) Analysis of the Causes of the Decrease in Hydraulic Windlass Pump Pressure on Mv. Kt 06. Diploma Thesis, Semarang Maritime Polytechnic

[3] Rama Maulana Putra, 2020, Analysis of gear damage on the windlass on MV. Kartini Samudera, Thesis, Diploma IV Program, Engineering Study Program, Semarang Maritime Polytechnic

[4] Rizaldhi, Achmad Rizki, 2019. Analysis of Replacement of Conventional Windlass Machine with Hydraulic Windlass Machine. Diploma thesis, Surabaya State Polytechnic of Shipping.

[5] Hutama, MH, Yudo, H., & Iqbal, M. (2016). Anchor Chain Fatigue Analysis Using Finite Element Method. Journal of Marine Engineering, 4(3), 1–10.

[6] Smith, S. (2009). International Application Published Under The Patent Cooperation Treaty (PCT). Geneva: World Intellectual Property Organization

[7] Supendi, A., & Fitri, M. (2022). Selection of Component Specifications for Pump Performance Test Equipment Using the Bernoulli Equation Analysis Method. Journal of Mechanical Engineering, 11(1), 42–51.

[8] Suwanto, S. (2019). Anchor Machine Operation and Maintenance System at Km. Sentosa 207. Semarang: Semarang Maritime University Paper.

[9] Bungin, Burhan. 2003. Qualitative Research Data Analysis “Philosophical and Methodological Understanding Towards Mastery of Application Models”. Jakarta: Raja Grafindo Persada