Safety Risk Analysis of LCT Type RoRo Vessel Berthing Process Using FMEA and Fuzzy FMEA Methods
Article Sidebar
Main Article Content
Abstract
The berthing process of Roll-on/Roll-off (RoRo) vessels of the Landing Craft Tank (LCT) type at Company X presents significant operational risks. This study analyzes safety risks using the Failure Mode and Effects Analysis (FMEA) and fuzzy FMEA methods. The highest RPN values from FMEA were found in ramp door placement (RPN = 50), safety cone installation (RPN = 48), and vehicle access (RPN = 45). Fuzzy FMEA identified ramp door risk (D20) as the top priority with FPRN = 134. Risk controls were proposed using the hierarchy of controls. Data were gathered from observations, interviews, and questionnaires with nine respondents. The integrated approach provided a more objective and practical risk analysis.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
Allow anyone to modify, improve, and make derivative works, even for commercial purposes, as long as they credit to you for the original work.
Accepted 2026-03-23
Published 2026-03-29
References
[1] R. O. Gurning and E. Budiyanto, Manajemen Bisnis Pelabuhan. Jakarta, Indonesia: APE Publishing, 2007.
[2] Masroeri, “Analisis operasional kapal Roll On/Roll Off (RoRo) dalam distribusi logistik antar pulau di Indonesia,” Jurnal Transportasi Laut, vol. 12, no. 2, pp. 45–53, 2018.
[3] Sudra, “Evaluasi kinerja kapal Landing Craft Tank (LCT) pada pelayaran jarak pendek,” Jurnal Teknik Perkapalan, vol. 4, no. 3, pp. 201–208, 2016.
[4] Suwandiyana, “Manajemen risiko operasional dalam kegiatan sandar kapal di pelabuhan,” Jurnal Manajemen Transportasi & Logistik, vol. 8, no. 1, pp. 55–63, 2021.
[5] Pambayun, “Analisis faktor risiko kecelakaan kerja pada aktivitas pelabuhan dan transportasi laut,” Jurnal Keselamatan Transportasi, vol. 6, no. 1, pp. 12–21, 2024.
[6] International Maritime Organization (IMO), International Convention for the Prevention of Pollution from Ships (MARPOL) 73/78 Annex III: Prevention of Pollution by Harmful Substances Carried by Sea in Packaged Form. London, U.K.: IMO, 2017.
[7] Z. Ikhsan, “Evaluasi penerapan Job Safety Analysis (JSA) dalam sistem keselamatan kerja di industri maritim,” Jurnal Keselamatan Kerja dan Lingkungan, vol. 10, no. 2, pp. 89–97, 2022.
[8] A. Ghasemi, “Limitations of Job Safety Analysis in dynamic work environments and risk assessment improvement,” Safety Science, vol. 159, pp. 1–9, 2023.
[9] Hartanti, D. A. Pratiwi, and S. Nugroho, “Implementation of Failure Mode and Effects Analysis (FMEA) for risk mitigation in industrial processes,” Journal of Industrial Engineering and Management, vol. 15, no. 3, pp. 456–468, 2022.
[10] K. Balaraju, D. Raj, and V. Murthy, “Fuzzy FMEA for risk evaluation in engineering systems,” International Journal of Quality & Reliability Management, vol. 29, no. 5, pp. 1–15, 2022.
[11] N. Nuchpho, “Application of fuzzy logic in risk assessment and decision-making processes,” Engineering Journal, vol. 23, no. 4, pp. 125–134, 2019.
[12] F. Chandra, “Integration of FMEA and fuzzy logic approach for improving risk prioritization,” International Journal of Industrial Engineering, vol. 28, no. 2, pp. 145–154, 2021.