Fish Terminal Design To Reduce Fishermen Operation Costs In Banda Island
Article Sidebar
Main Article Content
Abstract
One of the islands in the Maluku province is a cluster of the Banda Islands. The Banda sea is known as the waters are very rich in various kinds of fish. The center for Economic and Development-LIPI (1999) have calculated the average time fishermen go out to sea in a year as many as 200 days, that entire day, which allowed her to sea. Therefore, at the time of going to sea fishermen use the time optimally to work throughout the day so that it will drain the operational cost and energy fishermen to return to the coastal areas bring their catch to that required terminal of the fish. Teriminal fish serves as a place of temporary suspension to raise and lower the tangakapan fishermen so that it can maintain the quality of the catches of fishermen to the place of destination. The purpose of this study is to design the terminal of fish to help fishermen. Carried out technical calculations such as the determination of the payload, the volume of cargo space, electricity needs, trim, stability and freeboard. As for the size of the main result is Lbp = 81,19 m, B = 15,00 m, H = 7,00 m, and T = 5,50 m and the cost of the construction of the terminal fish Rp 85,053,530,160.11
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
M. W. R. Iswandi, and H. A. Kurniawati, "Design SPBN Equipped Station Supplies Fishing Buoyancy to Support the Activities of the Fisheries in the Province of NTT," Jurnal Teknik Its, Vol.9, No.2, 2020.
Nurhikma, "the Concept of Floating Fosh Terminal of the Ocean To reduce the Operational Cost of the Fisherman," In the Seminar of Marine Science and Technology SENSISTEK, Gowa, November 3, 2021.
S. H. Harmadi, and, A. L, "Indonesia is a maritime country which has an area of waters reached 3.25 million km2 or about 63persen region Indonesia. The sea. pp. 1-125, 2014.
H. Palippui and S. Ramadhan, “Analysis of The Strength of Barge Structures in the Load Out Offshore Module (Top Side) Process with SPMT”, zonalaut, vol. 1, no. 1, pp. 1-5, Mar. 2020.
F. Khusniawati and H. Palippui, “Analysis of Injector Maintenance Due to Fuel Clogging in The Main Engine of The Ship”, zonalaut, vol. 1, no. 2, pp. 43-48, Jul. 2020.
R. . Japri, “Profile Construction Design for General Cargo Ships Using the Ship Comparative Method”, zonalaut, vol. 2, no. 2, p. 65-73, Jul 2021.
W. Widianingrum, J. Sade, and H. Palippui, “Analysis of Placement and Needs for Cathodic Protection on Mooring Buoy at Pertamina Fuel Terminal Luwuk ”, zonalaut, vol. 2, no. 2, pp. 57-54, Jul. 2021.