Finite Element Analysis of the Gravity Davit Structure on MV. Sultan Hasanuddin with Variations Lifeboat Load Capacity

Main Article Content

Muh. Jafar
Darwis Darwis
Andi Dirga Noegraha

Abstract

The purpose of this study is to measure the maximum support capacity of the Davit structure on MV. Sultan Hasanuddin using variations in lifeboat load capacity. Davits on ships function as tools used to raise or lower lifeboats on board. The method used in this study is a quantitative method employing the Finite Element Analysis (FEA) technique to determine the ultimate stress and maximum deformation occurring in the Davit structure of the MV. Sultan Hasanuddin due to loading effects. Based on simulation results with six variations of passenger loading, the maximum stress experienced by the Davit (Davit) of the MV. Sultan Hasanuddin was on the suspension block, specifically on the davit chain. It was found that the maximum passenger weight limit on the lifeboat that does not exceed the BKI allowable stress is 4,363 kg, or an additional load of 35% of the total passenger weight, with a maximum gravitational force acting on the lifeboat of 74,441 N on the davit structure.


 

Downloads

Download data is not yet available.

Article Details

How to Cite
Jafar, M., Darwis, D., & Noegraha, A. D. (2025). Finite Element Analysis of the Gravity Davit Structure on MV. Sultan Hasanuddin with Variations Lifeboat Load Capacity. Maritime Park: Journal of Maritime Technology and Society, 4(3), 180–190. https://doi.org/10.62012/mp.vi.45323
Section
Ocean Engineering
Author Biographies

Muh. Jafar, Polytechnic of Seafaring Science, Makassar, Indonesia

 

 

Darwis Darwis, Polytechnic of Seafaring Science, Makassar, Indonesia

 

 

Andi Dirga Noegraha, Academy Maritime Indonesia AIPI

 

 

Received 2025-06-30
Accepted 2025-07-24
Published 2025-10-08

References

[1] G. Sitepu, Sunarto, and A. Panjaitan, “Analisis Kekuatan Struktur Davit (Dewi-Dewi) dan Penunjangnya,” in PROSIDING HASIL PENELITIAN FAKULTAS TEKNIK, Fakultas Teknik UNHAS, Dec. 2012.

[2] D. R. Moss and M. M. Basic, Pressure Vessel Design Manual, 4th ed. Elsevier Inc., 2013. doi: 10.1016/C2010-0-67103-3.

[3] F. M. Tambunan, M. Sapril Siregar, and S. Nurman, “Implementasi Perawatan Sekoci Penolong di Kapal MV. Maximus I,” Jurnal Pendidikan Tambusai, vol. 7, no. 1, pp. 3926–3933, Apr. 2023, doi: 10.31004/JPTAM.V7I1.5871.

[4] A. Wahyudin, H. Yudho, and A. F. Zakki, “Analisa Kekuatan Struktur Gravity Davit pada Kapal Perintis 1200 GT dengan Metode Elemen Hingga,” Jurnal Teknik Perkapalan, vol. 7, no. 1, pp. 343–354, Sep. 2019, doi: 10.2/JQUERY.MIN.JS.

[5] Sunaryo, “Analisis Kekuatan Gravity Boat Davit Dengan Variasi Beban Pada Sekoci,” in Prosiding Seminar Nasional Tahunan Teknik Mesin (SNTTM), Badan Kerja Sama Teknik Mesin (BKS-TM) Indonesia, Nov. 2008. doi: DAM-5/160.

[6] Muhammad Alfin Prasetiya, Ari Sriantini, and Dedy Kristiawan, “Optimalisasi Perawatan Sekoci Penolong dan Dewi-Dewi Sebagai Penunjang Keselamatan Pelayaran di KM. Kendhaga Nusantara 6,” Globe: Publikasi Ilmu Teknik, Teknologi Kebumian, Ilmu Perkapalan, vol. 2, no. 4, pp. 41–55, Sep. 2024, doi: 10.61132/globe.v2i4.562.

[7] Inc. ANSYS, “Ansys Explicit Dynamics Takes Over When Implicit Isn’t Enough,” Ansys Explicit Dynamics, pp. 1–8, 2021.

[8] H. Hu and Z. Zhong, “Explicit–Implicit Co-Simulation Techniques for Dynamic Responses of a Passenger Car on Arbitrary Road Surfaces,” Engineering, vol. 5, no. 6, pp. 1171–1178, Dec. 2019, doi: 10.1016/J.ENG.2019.09.003.

[9] G. Cocchetti, M. Pagani, and U. Perego, “Selective mass scaling for distorted solid-shell elements in explicit dynamics: Optimal scaling factor and stable time step estimate,” Int J Numer Methods Eng, vol. 101, no. 9, pp. 700–731, Mar. 2015, doi: 10.1002/NME.4829.

[10] A. Noegraha, “Analisa Tegangan dan Regangan Pada Struktur Kapal Pinisi Dalam Sistem Peluncuran Kapal Tradisional di Bulukumba,” Prosiding Seminar Nasional Ilmu Teknik Dan Aplikasi Industri Fakultas Teknik Universitas Lampung, vol. 5, Nov. 2022, doi: 10.23960/PROSIDINGSINTA.V5I.96.

[11] A. D. Noegraha, R. Djamaluddin, R. Irmawaty, and G. Sitepu, “Damage Detection on Structure of Pinisi in Ship Launching Process,” Lecture Notes in Civil Engineering, vol. 381, pp. 165–176, 2023, doi: 10.1007/978-3-031-39663-2_12.

[12] A. D. Noegraha, R. Djamaluddin, R. Irmawaty, and G. Sitepu, “Study of the Effect Launching System using Airbags on the Hull Structures of Pinisi Ship,” Journal of Advanced Research in Applied Sciences and Engineering Technology, vol. 49, no. 2, pp. 278–295, Aug. 2024, doi: 10.37934/ARASET.49.2.278295.

[13] P. T. Irianto, H. Yudo, and W. Amiruddin, “Analisa Kekuatan Struktur End Shackle Rantai Jangkar Akibat Adanya Beban Lingkungan pada Kapal Perintis 1200 GT,” Jurnal Teknik Perkapalan, vol. 8, no. 4, pp. 509–519, Jul. 2020.

Similar Articles

1 2 3 4 5 6 7 8 9 > >> 

You may also start an advanced similarity search for this article.